Tender number Tender code: CBL_20161115_29368590
Opening time: 2016-12-09
Bulletin category: Domestic tender
Tenderee: Shandong Iron and Steel Group Rizhao Co., Ltd. Source of funds: Other tender number Shandong Iron and Steel Group Co., Ltd. Rizhao Iron and Steel Co., Ltd. project 3500mm furnace coil heating furnace tender announcement This announcement is a very important document, and constitute part of the tender documents, please Read it carefully. To apply for bidding, payment, etc., please follow this announcement. If the announcement, bid deadline and opening time and place specified in the bidding documents are inconsistent with this announcement, this announcement shall prevail.
Solemnly declare: 1. Rizhao Company always adheres to the principle of fairness, openness, and fairness to carry out the bid evaluation work. Some units or individuals, under the banner of leaders at all levels, promised to help bidders win the bid and demand relevant fees. All of them are scams, and bidders must not believe it. Otherwise, the bidders themselves will bear the consequences.
2. The bidding unit may not lend qualifications or allow natural persons to call for bids. The tenderer finds clues to the above-mentioned violations and has the right to self-invest or entrust third-party investigations. The bidder shall approve the investigation conclusions and automatically waive the right to defend. Once verified, the tenderee has the right to cancel the bidder’s qualifications for bidding, to win the qualification for the bid or to terminate the contract; if the bid security is not refunded, and if the performance guarantee has been processed, the performance contractor shall bear the amount of the performance guarantee or the breach of contract amounting to 1-10% of the contract amount.
Potential bidders:
Shandong Iron and Steel Group Co., Ltd. Rizhao Iron and Steel Fine Base project has been approved by the National Development and Reform Commission, Shandong Iron and Steel Group Rizhao Co., Ltd. is a subsidiary of Shandong Iron and Steel Group Co., Ltd., responsible for undertaking the "Shandong Iron and Steel Group Co., Ltd. Rizhao iron and steel boutique base project" implementation. It is proposed to adopt the EPC contracting model for the construction of the 3500mm Furnace Heating Furnace (hereinafter referred to as “the Project”) for the Rizhao Iron & Steel Refinery Base Project. The relevant issues for bidding for this project are now announced as follows. Potential bidders who have tender conditions are welcome to bid:
I. Name of the project's construction unit: Shandong Iron and Steel Group Rizhao Co., Ltd. II. Tenderee and bidding agency Tenderee: Shandong Iron and Steel Group Rizhao Co., Ltd.
III. Project Description and Scope of Bidding (I) Main Contents of the Project:
The 3500mm furnace coil project is a production unit of Shandong Iron and Steel Group Co., Ltd. Rizhao Steel Boutique Base. It mainly produces plate products with an annual output of 1.3 million tons. This project is a 260t/h walking beam heating furnace in the 3500mm furnace coil production unit using the design, procurement and construction (EPC) turnkey general contracting construction.
The main contents of the tender: hot-rolled roller conveyors in the slab storage area, loading racks, conveyor roller conveyors, slab weighers, hydraulic and lubrication systems, electrical automation systems, and roller conveyors for loading and unloading in the furnace area. Steel machines, stepping machines, combustion systems, vaporization cooling systems, hydraulic lubrication systems, gas systems, air supply systems, smoke extraction systems, electrical automation systems, furnaces, and supporting facilities (see technical specifications for specific details).
(B) Contracting method:
This project plans to use the "design - procurement - construction - assessment and acceptance" (EPC general contracting) approach.
(3) Duration:
The project duration includes construction period, trial production period and assessment and acceptance period. The construction period of the 3500mm furnace heating furnace shall not exceed 18 months. It shall be counted from the effective date of the contract until the completion of the corresponding project contents. The heat load test run will succeed and the qualified product will be produced. After the heat load test runs successfully and produces qualified products, it enters the trial production and inspection acceptance period. The trial production period is 1 month, and the assessment acceptance period is within 6 months after the trial production ends.
(4) Scope of tender:
The 3500mm furnace heating furnace project bidding scope covers the process, civil, and equipment design and equipment materials for all the equipment and related supporting facilities in the slab storage area and heating furnace area within the scope of the red line, except the design, supply and construction of the tendering party. ,Construction and installation, commissioning, oven and test run, including heat load test run, trial run, completion of functional assessment, personnel training, technical service up to completion acceptance, and defect repair, project quality assurance/warranty obligations during the quality assurance period The whole process of turnkey projects. The general contractor of the project is responsible for the design, construction, installation and integration of the tender project.
Source of funds: self-financing.
Fourth, bidder qualification requirements The tender qualification review to take the post-approval method, the specific requirements are as follows:
(1) An enterprise legal entity registered in China that can independently sign and perform contracts. Registered capital requirements 20 million yuan.
(2) Qualification requirements: Qualifications and qualifications of Class B Metallurgical Industry Design issued by the construction administrative department. (The bidder must provide a link to the website of the authoritative organization that publishes and can check the above qualification and validity period). Or a Sino-foreign joint venture or wholly foreign-owned enterprise with the appropriate design, manufacturing, and project implementation capabilities as assessed by the evaluation committee.
(III) Performance requirements: To provide all the contracted heating furnace step-by-step heating furnaces that have been completed and put into production, independently designed, and used for the production of wide-thick plate or hot-rolled coil furnaces with a width greater than 8 meters since 2005, and the original contract shall be provided. Copies require no less than 2 items.
(d) The Commonwealth does not accept bids in this tender.
V. Notes to bidders
1. When submitting bidding documents, the following information shall be submitted at the same time: The following documents shall be included in the bidding documents: the legal representative's power of attorney (for non-statutory bidders), a copy of the business license, a copy of the tax registration certificate, Copies of the copy of the organization code certificate, as well as a copy of the qualification certificate and relevant proof of performance. The above materials should be stamped with the official seal of the bidder, and the originals should be carried in the bid for verification. Tender documents are taken in electronic format (U disk or CD-ROM, editable version, Excel version with itemized quotation) and paper documents.
A copy of the contract affixed with the official seal shall be provided for the performance (copy shall include at least: the basic information pages of the parties to the contract, the contractual work content page, the contract signature page and the use unit's operation certificate, and the official seal of the use unit, contact information, etc.) Each contract must provide details of the quantity of the subject matter, and the order of providing the copy of the performance shall be consistent with the order of the performance list. The original contract shall be provided for reference when bidding. If the original contract cannot be provided, the tenderee has the right not to accept the bid.
The above materials should be stamped with the official seal of the bidder, and the originals should be carried in the bid for verification.
2. The bidding documents shall be in electronic format (U disk, editable version, Excel version shall be provided for itemized quotation) and paper documents.
3. The bidder shall abide by the relevant laws and regulations of the country and there shall be no major violation of the law.
4. The bidder has corresponding technical capabilities and good financial capabilities in terms of personnel, equipment, funds, etc., has good bank credit and business reputation and a sound financial accounting system, is not being ordered to suspend business, property is taken over, frozen and bankrupted. status. It is required to provide bank credit certificates and audited financial reports and latest financial statements for the last three years (2013-2015).
5. There is a good record of paying taxes and paying social security funds.
6. Project Manager Qualifications: Qualified for senior technical titles and project manager qualifications, with total furnace contractor performance (subject to the provided contract). When participating in this project bid, he did not act as project manager for other unfinished projects. It is also forbidden to serve as a project manager for other projects before completion.
7. Requirements of the technical person in charge: The senior professional titles of the relevant professional, as well as the technical director (or major designer) of the general contractor or design project of the furnace project. When participating in the bidding for this project, he did not assume technical responsibility for other unfinished projects, and he was not allowed to serve as a technical person in other projects until the completion of the bid.
8. Other requirements:
1) It has an effective quality management system certification.
2) It has corresponding total contracting capacity in terms of personnel, equipment, and funds. The main personnel (project managers, technical managers, design managers (general managers), purchasing managers, construction managers, control managers, operation managers, financial managers, and other related personnel) shall be the bidders’ own personnel and fill out the requirements according to the requirements of this bidding document. Provide corresponding certificates and certificates.
The bidder does not bid or provide information in accordance with the requirements, and the bid evaluation committee will make a review that is not conducive to the bidder; the tenderer has the right to cancel the bid or disqualify the bidder for the bidder’s falsification of the above request. The right not to return.
Sixth, announcement and bid registration time
From November 15, 2016 to November 22, 2016.
VIII. Deadline for submission and opening of bids
At 9:00 on December 9, 2016, the overdue period was deemed as abandonment of the bid.
A quote for this tender does not allow the second quotation; the quotation is unique.
Nine, bid registration and bidding documents to obtain the way this tender using online registration. Potential bidders who are interested in participating, (.)
The target book fee for this tender is 800 yuan.
Contact: Zhang Jie
Mobile:
phone
fax
E-mail:
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
